Test overview

Where is the test facility located?

The tests will be performed at the Machinery Technology Center at the Sumiyoshi Factory, Osaka.
Please refer to the following page for access information.
https://www02.global-kurimoto.com/us/access.html

What type of test euipment does KURIMOTO offer?

Please see the following page for a list of test equipment.
https://www01.kurimoto.co.jp/co-lab/about/test-machine.html (Japanese)

What types of analysis device does KURIMOTO have?

We have the following analysis devices:

• ・Particle Size Analyzer MT3300EXⅡ
• ・Powder Characteristics Tester PT-X
• ・Karl-Fisher Moisture Meter CA-200/VA-200/VA-122
• ・Moisture Analyzer MOC-120H, MOC63u
• ・Rheometer MCR92
• ・Viscometer TVB-10
• ・pH Meter D-51
• ・Blaine Air Permeator, Particle Size Measuring Instrument
• ・Hardgrove Grindability Machine
• ・Hardness Tester KHT-20N
• ・Whiteness Meter TR-600

How much sample is needed for the testing?

The amount of sample required will vary depending on the model, size and purpose of test euipment.
For details, please contact us using the form below.
https://www02.global-kurimoto.com/us/inquiry.html

Is there a fee for a test?
If so, how much does it cost?

There is a fee for a test. We will provide you a detailed cost quotation on agreement with a test.

The fee includes setup, processing, and cleanup. Test samples and feedstocks will be returned to cutomers after the test is complete.

Do you consider safety when performing tests?

We will perform tests with due consideration for safety.

If the hazards of raw materials (such as dust explosibility) are unknown, we may perform evaluation tests and ask you to submit the test results.

When can we run a test?

The testing date may change depending on the testing reservation situation.
Also, depending on the model and test content, it may take some time before the testing can be performed, including the preparation period.
For more information, please contact us using the form below.
https://www02.global-kurimoto.com/us/inquiry.html

How long does a test take?

It depends on test conditions, but it will take about one day to one week.
The duration and schedule will be adjusted depending on test details.

Can I borrow protective equipment for a test?

We can lend you protective equipment such as helmets, work clothes (jackets, winter clothes), earplugs, simple dust masks, and gloves.

Can I supervise a test?

Yes, in case you cannot attend in person, we can also perform remote experiments (live broadcasting) and independent tests without your presence.

Is there a limit to the number of participants?

There are no restrictions, but if you come as a large group (approximately 7 to 8 people), it may be difficult to check the status of the testing.

Test services

Is it possible to run a test using hazardous materials?

Depending on kinds of feedstock, we may not be able to meet your request.
If you can send us your feedstock information in advance, we will check whether we can accomodate your request.

Is it possible to process feedstocks that contain organic solvents?

Depending on kinds of feedstock, we may not be able to meet your request.
If you can send us the raw material information in advance, we will check whether we can accomodate your request.

Can I ask contract manufacturing?

We cannot accept requests for contract manufacturing.
We can only provide a test for customer's purpose of considering equipment installation.

Is it possible to ask just a sample production?

We basically run a test for customer's purpose of considering equipment installtion. We can work if a certain amount of samples are required for evaluation.

Can KURIMOTO perform on several days in a row?
(Firing test using rotary kilns, etc.)

We are unable to accommodate long-term testing, including night shifts.

Can KURIMOTO perform on Saturdays, Sundays, and public holidays?

As a general rule, we can only provide a test on business days, excluding weekends and holidays.

Is it possible to run a test with an inert gas environment?

Some types of equipment are available.
If you would like to run a test witn an inert gas environment, please contact us in advance.

Do I need to submit any documents when requesting a test?

Our person in charge will contact you and provide a questionnaire to be filled out before testing.

Test euipment rental

Can I rent a test equipment?

The following test equipment is available for rental:

• ・KRC Kneader（S1/S2）
• ・Hybrid Reactor（0.12L/1L）
• ・Pocket Jet Jr.（PJ6）
• ・Pocket Jet（KJ25）
• ・GADJET（H20）
• ・CD Dryer（CD80）
• ・Batch Rotary Kiln
• ・SC Processor Differential Speed Type（SCPD100）
• ・Solvent Recovery System

For more information about availability, please contact us using the form below.
https://www02.global-kurimoto.com/us/inquiry.html

Can I rent an auxiliary equipment (feeders, etc.)?

We also rent auxilliary equipment, however the rental period for some models may be limited due to our test schedules etc.

For more information, please contact us using the form below.
https://www02.global-kurimoto.com/us/inquiry.html

What is the rental duration for test equipment?

Varies depending on model and availability.
For details about the rental duration, please contact us using the form below.
https://www02.global-kurimoto.com/us/inquiry.html

Do KURIMOTO provide follow-up on how to use a test equipment for rental on site.

If you require assistance with operating a test equipment, please let us know in advance and we will dispatch our supervisor as required.

Support services in testing

Can KURIMOTO provide technical information to meet test objectives?

We provide technical information as we perform testing to help you achieve your goals. After testing is complete, we will provide you with a detailed report including operational data and considerations.

Is it possible to measure particle size immediately in a grinding test?

Yes, after sampling, particle size measurement results are available in approximately 5 to 10 minutes, allowing you to consider or change the test conditions for the next test based on the results.
Please note that this product only supports wet method and does not support dry method.

Is it possible to measure the amount of wear on the equipment in a grinding test?

Yes, the equipment is weighed before and after the testing and the amount of wear is calculated.

Is it possible to check milled products using a scanning electron microscope?

Yes, if you would like to observe particles with a scanning electron microscope, please contact us in advance.

Others

Can I see your test equipment?

Yes, for more information, please contact us using the form below.
https://www02.global-kurimoto.com/us/inquiry.html

Can I take photos and videos of test equipment?

Yes.

Is it possible to run a test after signing an NDA (non-disclosure agreement)?

Yes, please contact us prior to testing.