-
2025.05.08
Introduction of Steam Tube Dryer (Indirect Heating Dryer)
KURIMOTO introduces Steam Tube Dryer experimental machine.This experimental dryer has passed the individual examinations for class-2 pressure vessels (JIS). This continuous dryer system consists of the following components (example of combination).(1) Fixed quantity feeder for raw material(2) Steam Tube Dryer main unit(3) Product collection container(4) Air heater and blower for carrier gas heating(5) Bag filter and exhaust fan for fine powder collection Steam is supplied as a heat medium to the inner tubes inside the dryer.The raw material (material to be dried) is fed into the heated dryer from the inlet side via the feeder.And then moves to the outlet side by tilting and rotating the dryer, and the dried product is discharged.Moisture evaporated by heating is exhausted out of the system from the inlet side by feeding carrier gas heated by an air heater from the outlet side.Fine powder is collected by the bag filter and then discharged outside
-
2025.04.06
KURIMOTO will exhibit to “FOOMA JAPAN 2025”.
Kurimoto, Ltd. will be exhibiting at “FOOMA JAPAN 2025”. We will exhibit twin-screw continuous kneader “KRC Kneader” at our booth. If you are interested in improving efficiency and saving labor in food manufacturing, please visit our booth (3B-80). We look forward to welcoming you. Exhibition name: FOOMA JAPAN 2025Date: June 10 - 13, 2025Venue Name: Tokyo Big SightOur booth No.: 3B-80 For more information on the exhibition, please visit the “FOOMA JAPAN 2025” website.
-
2025.03.27
Kurimoto have launched the "Frequently Asked Questions" page.
Please check this page if you have any questions regarding preparation, contents, reservations, rentals, etc., for powder testing that can be handled at the Machinery Technology Center Co-LAB. Please click on "FAQ" from the "Contact us" menu in the upper right corner of the homepage. Click here to see this page.
-
2025.03.26
We added new application information in the “Industrial sectors” section.
The following three cases were added or updated. (1) Titanium Oxide: Click here to see this page. (2) Meat substitutes:Click here to see this page. (3) Silicon Carbide (SiC): Click here to see this page.
-
2025.03.04
Introduction of the New Agitating Mill “FK40” (Dry Ultrafine Grinder)
KURIMOTO has developed the FK40, a new agitating mill, designed to meet the growing demand for ultrafine pulverization (submicron level) and metal contamination-free processing. This continuous type grinding system (example of combination) consists of a raw material feeder, the agitating mill itself, a bag filter for product collection, and a blower for pneumatic transport. Inside the main unit, agitator blades rotate to agitate the grinding beads. The raw material (grinding objects), supplied from the top, is drawn into the machine through the hollow blade shaft and ground by the agitated beads. The finely ground product is then discharged from the top of the unit through pneumatic transport. We offer testing services at our Machinery Technology Center. If you are interested in an efficient dry grinding system for ultrafine processing, please feel free to contact us. FeaturesUltrafine grinding (single-micron to submicron)Metal contamination-minimizing designContinuous operation SpecificationsModel: Agitating Mill FK40Blade Speed: Up to
